Saddle inlays / Rear Inlays

SEK 275

per pair incl. VAT
SEK 220 excl. VAT

A gap or lift at the back, or the saddle tips backwards

Rear Inlays

Saddle inlaysRear

For when the saddle has too little support at the back, so it leaves a gap, lifts or tips backwards there. The inlays fill in between the tree and the panels at the back.

Thickness

Not sure which thickness? Start with the thinner one.

Coming soonComing soonAsk which model is right

If the horse is asymmetric, you can use a different thickness on the left and right: buy one pair of each and use one from each.

Delivery is SEK 70 within Sweden and SEK 120 to the rest of Europe. Terms of sale (in Swedish).

Position
At the back, between tree and panels
Thickness
6 or 8 mm
Material
3D-printed, with a gyroid structure inside
Firmness
Medium
Care
Washable: lukewarm water and mild soap, not in the washing machine
Sold
In pairs
Fits
Conventional saddles with a tree and panels, not western or treeless saddles

About the inlay

When you need it

  • There is a gap between the panels and the horse’s back at the back of the saddle.
  • The back of the saddle lifts when you ride.
  • The saddle tips backwards, sitting lower at the back than at the front.
  • Contact between the panels and the horse’s back is uneven.
  • The left and right sides differ, in the horse or in the saddle.
  • At the front the saddle sits evenly, without sinking down or pinching.
  • If the saddle sinks down at the front and tips forwards, the gap at the back can be down to it being too wide at the front. Then the Stirrup Bar Inlay, Narrowing or the Tree Point Inlay, Narrowing 4° is a better choice.
  • If it pinches at the front and tips backwards, that can be down to it being too narrow at the front. Then the Rear Inlays are the wrong answer, and what it needs is a fitting.

What it does

  • Fills gaps at the back.
  • Gives more even contact and a more stable saddle.
  • A riser pad that lifts the back works beneath the panels. The inlays work one layer up.

Installation

They slide in between the panels and the tree at the back. You put them in and take them out yourself, with no tools.

How to put it in

No tools, and no need to open the saddle

  1. Turn the inlay so that the flat side lies against the tree and the shaped, patterned side against the panel.
  2. If the inlay has small ears, they should point forwards, the same way as the saddle.
  3. Slide it in through the saddle’s gullet and push it home until it sits firmly.
  4. Pressure from the saddle and rider holds it in place, with no glue or Velcro. Check that it is sitting correctly every time you tack up.

Start gently and assess one change at a time. There is more in the guide to the inlays.

Drawing showing how the inlay slides into the saddle

Inlays are for fine-tuning a saddle that nearly fits, not for making an ill-fitting saddle fit. If the saddle slips to one side, have a vet look at the horse first. Not sure? Get in touch. We fit saddles and can help you choose.

Other inlays